General responsibilities:
-
Represent Client during fabrication of the electrical systems on the Turbine Foundations, including but not limited to LV systems, Earthing system, Array Cables Support, Measurements, and SCADA/Radio systems. Supervise contractor to ensure successful fabrication and assembly of the Turbine Foundations on time and within the required Quality standards and HSE regulations.
-
Ensure that free-issued equipment and components are installed, handled, and maintained in accordance with the project and vendor requirements.
-
Supervise commissioning/testing of electrical systems.
-
Provide advice and support to the Foundation Fabrication Manager.
-
Ensure that the Contractor is in line with agreed design and to the required specifications/quality.
-
Maintain a safe work environment within the team and among the contractors/sub-contractors on site according to HSE guidelines and local procedures.
-
Support all relevant interfaces between Contractors, Sub-Contractors, and Contractors’ QA/QC Representatives.
-
The Electrical Supervisor reports to the Fabrication Manager.
HSE/QA responsibilities:
-
Stay informed of the HSE system and the procedures relevant to the function and work in accordance with the requirements defined therein.
-
React to observed nonconformities and safety-related incidents.
Main tasks – Support to fabrication:
-
Planning: The supervisor shall plan and align with the Fabrication Manager when to inspect the Turbine Foundations. Planning with other stakeholders is required both internally and externally.
-
Align with HV cables department on layout and quantity of accessories: The supervisor shall become familiar with Array cable accessories and the layout for each Turbine Foundation.
-
Align with SCADA department on antenna and cable installation and requirements: The supervisor shall become familiar with antenna layout and installation methods.
-
Inspections with DIT (Digital Inspection Tool): The supervisor shall use the Digital Inspection Tool software program to perform all inspections.
-
Inspection of free-issued items at fabrication yard: The supervisor shall, in collaboration with the Foundation Contractor, supervise the installation of free-issued items, e.g., switchgears, electrical panels, etc.
-
Test on Completion, review of Electrical Test Certification, closing of punch lists: The supervisor shall review the Electrical Test Certification. Upon approval, the supervisor shall conduct a full inspection walkdown (Test on Completion) of the Turbine Foundation using DIT. Punch list(s) shall be submitted to the Contractor and closed before the loadout deadline.
-
Documentation responsibilities: Ensure all associated and relevant documentation is received, reviewed, and uploaded to the dedicated project document control system (e.g., test documents, delivery notes, incoming inspection reports, observation/NCR reports, photos, DIT reports, etc.).
-
Reporting: Provide the Fabrication Manager with daily input for monthly reports regarding progress, status, deliveries, open points, and any other project-related information.
Requirements: Qualifications:
-
3 – 5 years of experience as an Electrical Fabrication Supervisor
-
According to the specific function requirements (Responsibilities and main tasks)
-
Electrical Engineering degree
-
Site experience on fabrication yards, pre-assembly, or construction sites
-
Strong communication skills and ability to work independently
-
Experience with wind turbines is not mandatory
-
GWO courses for onshore fabrication: None
-
Ability to work at heights between 10 – 30 feet
-
Must be physically fit; the job requires significant walking (at least 10,000 steps a day) and climbing ladders
