Foundation Electrical Fabrication Supervisor

Foundation Electrical Fabrication Supervisor required for a leading Offshore Wind Farm developer, based in Poland

Responsibilities

• Represent client during the design, fabrication and commissioning of the electrical systems on the offshore foundations, including but not limited to LV systems, MV/HV systems, Earthing system, Array Cables, Measurements and SCADA/Radio systems.
• Supervise all onshore/offshore contractors/sub-contractors, to ensure successful fabrication and assembly of the offshore foundations on time and within the required Quality standards and HSE regulations.
• Ensures that free-issued equipment and components are stored, handled and maintained in accordance with the project and vendor requirements.
• Manage commissioning/testing of the offshore foundations.
• Advice and support to the Foundation Fabrication Manager and Commissioning Manager.
• Ensure that contractors/sub-contractors work, are in line with agreed design and to required spec/quality.
• Keep and maintain a safe work environment within the team and the contractors/sub-contractors on site according to HSE guidelines and local procedures.
• Support of all relevant interfaces between Contractors, Sub-Contractors, Contractors QA/QC Representatives, Designated Authorities.
• The Electrical Supervisor will report to the Electrical Engineer, WTG- and Foundation Fabrication Manager and Offshore Commissioning Manager.
• Stay informed of the HSE system and the procedures relevant to the function as well as to work in accordance with the requirements defined therein.
• Obliged to react on observed nonconformities to the written procedures and to contribute to the improvement of the system.
• Stay informed of the QA system and the procedures relevant to the function as well as to work according to requirements defined therein.

Tasks

• Become familiar with the electrical design and documentation package.
• Review of electrical documentation from WTG and FOU Contractor.
• Become familiar with the free issued items to be installed and how they interface with the WTG. IE Davit crane, Switchgear, Electrical panels, Antennas, Navaids etc.
• Plan a suitable Inspection and Test Plan (ITP) for SIP and CWP fabrication.
• Align on interfaces with internal stakeholder, e.g. array cables, SCADA.
• Create project specific check list for onshore and offshore testing.
• Perform incoming inspections of all free issued item deliveries at fabrication yard.
• Test on completion, review of Electrical Test Certification, closing of snag lists (Onshore scope).
• Ensure all associated and relevant documentation is received, reviewed and uploaded to the dedicated project document control system. E.g. delivery notes, incoming inspection reports, observation/NCR reports, photos, DIT reports, WTG contractor documentation.
• Provide weekly reports documenting progress, status, deliveries, open points and any other project related info.
• Review of Electrical Test Certification, closing of snag lists.

Requirements

• Technical education relevant for the subject matter or bachelor's in electrical engineering.
• All relevant safety trainings needed to perform the job, e.g. GWO, L_AUS.
• Site experience on fabrication yards, pre-assembly or construction sites.
• Experience from similar position.